[标准综合]MIL-STD-461E与461D的区别 [复制链接]

  MIL-STD-461E hr[B^?6  
jWXR__>.  
MIL-STD-461E: "DOD Interface Standard Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment" was published on August 20, 1999 and consolidates MIL-STD-461D and MIL-STD-462D into one Standard. The associated Data ITem Descriptions (DIDs) are as follows: 8wII{FHX  
Gg9VS&VI  
DID NUMBERDID TITLE )_77>f
%  
79SqYe=&uy  
DI-EMCS-80199B Electromagnetic Interference Control Procedures (EMICP) U~*c#U"bh  
DI-EMCS-80200B Electromagnetic Interference Test Report (EMITR) Xb]=:x(  
DI-EMCS-80201B Electromagnetic Interference Test Procedures (EMITP) gwSN>oj &  
#M5_em4kN  
Major changes MIL-STD-461D/462D to MIL-STD-461E: 2'wr={>W  
kDzj%sm!  

isc]
1. EUT hardware and software must be representative of production. Susceptibility scan rates and the frequency of measurement system test checks were revised.

}xDB ~k  
-B1YZ/.rz"  
· Conducted Emissions .3VK;au\\  
N5nvL)a~  
CE101: is no longer applicable to shipboard equipment iOT)0@f'  

d5
DP^u  
· Conducted Susceptibility UvkJ?Bu  
`gBD_0<T7  
CS101: applicability and limits were extended to 150 kHz \bhOPK>w  
CS109: measurement procedures were revised &*B>P>x  
CS114: limits were revised *FV0Vy  
CS115: applicability was revised for several equipment classes ngP7'1I  
CS116: measurement procedures were revised; JE0?@PI$  
applicability was revised for several equipment classes _u>t3RUA  
[ S5bj]D  
· Radiated Emissions hM~eJv  
lDo(@nM  
RE101: the 50 cm requirement was deleted; limits are more stringent a`#S|'oatC  
RE102: limits were revised for submarine equipment O -G1})$  
OCCEL9d  
· Radiated Susceptibility sltk@  

n!a<:]b<  
RS101: limits were revised for Navy applications; added an alternative test using the Helmholtz coil hp*<x4%*a"  
RS103: added use of mode-tuned reverberation chambers above 200 MHz q0Xoj__c!A  
RS105: limits were revised for consistency with IEC Standards * vYn_wE  
!2z!8kI  
文章出自: 世科网 4IZlUJ?j+c  
G]4OFz+