[标准综合]MIL-STD-461E与461D的区别 [复制链接]

  MIL-STD-461E FjD,8^SQW  
~gu=x&{  
MIL-STD-461E: "DOD Interface Standard Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment" was published on August 20, 1999 and consolidates MIL-STD-461D and MIL-STD-462D into one Standard. The associated Data ITem Descriptions (DIDs) are as follows: qq OxTG]  
Of- C  
DID NUMBERDID TITLE )D:9R)m  
4F}Pu<;  
DI-EMCS-80199B Electromagnetic Interference Control Procedures (EMICP) 8V6=i'GK  
DI-EMCS-80200B Electromagnetic Interference Test Report (EMITR) I D)^vwn  
DI-EMCS-80201B Electromagnetic Interference Test Procedures (EMITP) St6aYK  
|)9thIQF  
Major changes MIL-STD-461D/462D to MIL-STD-461E: gdl| ^*tc  
88 {1mA,v  

isc]
1. EUT hardware and software must be representative of production. Susceptibility scan rates and the frequency of measurement system test checks were revised.

4:D:|r  
}g>kpa0c  
· Conducted Emissions \^
9pW 2v  
FY8!g'.Oe  
CE101: is no longer applicable to shipboard equipment -j&
Vtr  
+oZH?N4yaM  
· Conducted Susceptibility F}D3,&9N  
4d`+CD C  
CS101: applicability and limits were extended to 150 kHz #-{N Ws\  
CS109: measurement procedures were revised B`{mdjMy  
CS114: limits were revised 1`JB)9P  
CS115: applicability was revised for several equipment classes mb1V u  
CS116: measurement procedures were revised; Vb!O8xV4;+  
applicability was revised for several equipment classes |4mVT&63(  
W~ruN4q.  
· Radiated Emissions 8lP6-VA  
U~H?4Izl=  
RE101: the 50 cm requirement was deleted; limits are more stringent 6B6vP%H#  
RE102: limits were revised for submarine equipment U|5-0u5  
JOD/Raq.1k  
· Radiated Susceptibility PsnGXcj  
314=1JbL  
RS101: limits were revised for Navy applications; added an alternative test using the Helmholtz coil ,d_Gn!  
RS103: added use of mode-tuned reverberation chambers above 200 MHz (u1m]WYL  
RS105: limits were revised for consistency with IEC Standards 6iA( o*'Yn  
O XP\R  
文章出自: 世科网 yxWO
[ Z  
\cJa;WM>