|  客服中心  |  网站导航
当前位置: 首页 » 学院 » 检测技术 » 安规(safety) » 正文

世界各国铭牌标签及要求大全

放大字体  缩小字体 世科网   发布日期:2011-09-27  浏览次数:1959
核心提示:韩国认证KC mark KC Contents of Marking ① KC mark ② Certification number(or application no. of Confirmation Letter of
韩国认证KC mark
KC

Contents of Marking
KC mark
Certification number(or application no. of "Confirmation Letter of Declaration")
Product Name (IT shall be written in Korean.)
Model name
Input Rating
Manufacturer Name
mark for double insulation appliances
Rate input time if the input period of products is short
Production date (e.g. year and month of the production date or lot number)
Phone number of service provider (It shall be located in Korea.)
EMI or EMI/EMS Mark (Optional)
EMI/EMS
 
12 新要求
전기용품안전관리법에 의한 표시
电器用品安全管理法依据标签(上面韩文一定要)

Marking method
The size of the mark can be autonomously oriented with the size of the product
The mark shall well be adhered, printed on the product and its container to be easily recognized.
The certification body name "KTL" or "KETI"(optional) and the safety certification number shall be indicated under the safety certification mark, and items that required in the safety standards or ATS defines shall additionally remarked in Korean or English language.
The color of the mark is normally Black.

韩国认证能效 mark
能效标签



这个是我自己设计的标准模板

 

日本PSE mark



1) Mandatory Mark to be affixed on Category A product
2) Name of Authorized (Approved) conformity assessment body
3) Name of Notifying Importer
4) Rated voltage, etc.



1) Mandatory Mark to be affixed on Category A product
2) Name of Notifying Importer
3) Rated voltage, etc.
 


 
 
香港HKSI mark

要求如下:
1. The Mark can be enlarged or reduced with its ratio remaining unchanged.
Where limitations of space prevent the use of the Mark in the minimum size (i.e. 5mm in width or height), request to use a Mark of smaller dimensions will be considered by HKSI on the basis of legibility.



2. Generally, the Hong Kong Safety Mark is combined with the marking details that include the organization’s name/trade name/ trademark or HKSI License Number*and should be placed adjacent to the model’s identity as far as possible.


** When the HKSI License Number is used in lieu of the organization’s name or
equivalent, it must be adjacent to the Hong Kong Safety Mark. HKSI License
Numbers are recorded in the “Directory of HKSI Certified Products”.

3. The Mark generally appears as a label affixed adjacent to the brand, model no., rating plate, etc. of the certified product. Besides, manufacturers may also mould or embody
the Mark on the products.

4. Where the Hong Kong Safety Mark is permitted to appear on a product by a
separate marking medium, the organization’s name or equivalent, or HKSI License Number shall be included in the design of the separate marking medium.


5.The Hong Kong Safety Mark can be reproduced in black, blue (Pantone 540) or
inverted-white.


6.Products applying for Hong Kong EMC Mark should, in the first
instance, prove to be safety compliant. Thus, products certified to the Hong Kong EMC Mark will get a License comprising both the EMC and safety test compliance certificates.


 新加坡 PSB mark


The SAFETY Mark comprises of a safety logo enclosed in a square on the left and the word “SAFETY MARK” enclosed in a rectangle on the right. Below the logo is a unique certification number traceable to the registrant. The colour used is Pantone 287C Blue Colour

XX = year of certification (e.g. 01 for year 2001)
YYYY = serial number (e.g. 1234)
ZZ = CAB identity code (e.g. 11 for CAB ‘A”)

1 SAFETY Mark without Contrasting Background
(e.g. embossed on body of controlLED goods)
The safety logo, letters and certification number shall be of raised or lowered depth of not less than 0.51 mm.
The SAFETY Mark (consisting of both the safety logo and the word “SAFETY MARK”) shall have a height of not less than 9.5 mm. The certification number shall have a height of not less than 2.8 mm. Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.


2 SAFETY Mark with Contrasting Background
(e.g. silk screened on body of controlled goods or printed on rating labels or carton boxes or as standalone adhesive labels)
The SAFETY Mark (consisting of both the safety logo and the word “SAFETY MARK”) shall have a height of not less than 6.0 mm. The certification number shall have a height of not less than 1.6 mm. Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
3 Points for adherence
a) The SAFETY Mark shall be fully reproduced with the safety logo enclosed in a square on the left, the word “SAFETY MARK” enclosed in a rectangle on the right and the certification number traceable to the registrant across the bottom.
b) The SAFETY Mark can be embossed or silk screened on any coloured material or printed with the same colour used for rating labels or carton box markings. When printed as standalone adhesive labels, the colour of the safety logo, the background for the word “SAFETY MARK” and the certification number is Pantone 287C Blue Colour.
c) The SAFETY Mark shall be easily discernible on the controlled goods.
d) The SAFETY Mark shall be indelible and legible. The marking shall not be removed when rubbed lightly with a piece of cloth soaked with petroleum, spirit or water.
e) Rating labels or standalone adhesive labels with the SAFETY Mark shall not come loose or curled at the edges.
f) Please refer to the bromide provided by the Safety Authority for size relationship between the safety logo and the word “SAFETY MARK”. They could be enlarged or reduced proportionately and still meet the size requirements stipulated in point (1) and (2), depending on whether the background is non-contrasting or contrasting.


一.UL 1310 adaptor 要求

Application -
1.        Markings are molded, die-stamped, paint-stenciled, stamped or etched in metal or indelibly stamped or printed on pressure-sensitive label secured by adhesive.
2.        Unless otherwise specified, pressure sensitive labels which contain any of the required markings shall be R/C (PGDQ2) suitable for minimum 80°C and for the surface material or finish to which adhered.

Product Marking - All units shall be marked with the following.
1.        Listee's name or trademark as specified in Note 1 below.
2.        Model designation.
3.        Electrical ratings, including input voltage or voltage range, input frequency and, if specified in the individual Reports, input amperes, volt-amperes or wattage rating.  Additionally, output voltage in ac or dc and output current in amperes, volt-amperes or watts shall be marked, unless the unit is a battery charger marked for use with a specific battery pack.
4.        Output polarity (Note 2).
5.        Date code (Note 3).
6.        Factory identification if applicable.
7.        Product Identification and Use.  A unit shall be marked with one of the following terms, as applicable.  See individual Reports.
            a)"Class 2 Battery Charger,"
            b)  "Class 2 Transformer,"
            c)"Class 2 Power Supply," or
          d)  "Class 2 Power Unit."
Note 1:            The following marking or trademark may be used to identify the Listee:
Note 2:            The polarity of a direct current output shall be plainly marked unless the unit is provided with a polarized output termination.
Note 3:            Date Code - Consist of:  4 Digit Code, First 2 represent the week, the last 2 represent the year of manufacture.  Example:    2395 = Twenty third week of 1995

UL mark 基础要求

Listing Mark 5要件


  1 UL c UL 以及c UL us
的形状比例需符合UL mark 的标准图面(Aartwork“c”“us”的字体必须是Helvetica  Condensed Black ,®的尺寸最小为3/64英寸,UL mark的总直径小于3/8英寸的时候R可省略

2
LISTED 需大写,且形状比例及位置需符合UL mark 的标准图面(Aartwork)字体必须是
Helvetica Condensed Black
3
control number /file number listee's name 依照UL 工厂检验细则procedure内描述

  4
Product identity:产品名称须和procedure内描述相同或相似

  5
)如果该产品同时符合其他ULcategories,可以添加
“ALSO LISTED AS (PRODUCT IDENTITY)”

Classification Mark 4要件


  1
UL c UL 以及c UL us 的形状比例需符合UL mark 的标准图面(Aartwork“c”“us”的字体必须是
Helvetica  Condensed Black ,®的尺寸最小为3/64英寸,UL mark的总直径小于3/8英寸的时候R可省略
2CLASSIFIED 需大写,且形状比例及位置需符合UL mark 的标准图面(Aartwork
3
control number /file number listee's name 依照UL 工厂检验细则procedure内描述

  4
Product identity:产品名称须和procedure内描述相同或相似

UL
上述标志使用之前是需要到UL标签中心确认过并盖许可章后才可以使用的,大陆这边可以到广州UL进行确认。


UL RECOGNIZED 4要件
:
]

1) Recognized Company’s identification
       
需要列出认可公司名字和商标或UL 认可的商标名称

2)  Catalog, model or other product designation
3)  Where Rebuilt products are authorized in individual Test Reports, the word “REBUILT", "REMANUFACTURED", or "RECONDITIONED", as appropriate.
4)  UL mark
(可选的)®的尺寸最小为3/64英寸,UL mark的总直径小于3/8英寸的时候R可省略

中国CCC mark 要求


认证种类标注:
S-安全认证
E-电磁兼容认证
F-消防认证
I-信息安全认证
S&E-安全与电磁兼容认证

认证标志的加施方式:
1. 使用由认监委指定生产企业生产的标准规格认证标志;
2. 企业在获得批准后自行将标志印刷/模压在产品本体,铭牌或包装上。

认证标志的规格:
1.认证标志分标准规格认证标志和非标准规格认证标志2种,
2.非标准规格认证标志的规格与规定不同,但必须与标准规格认证标志的尺寸成线性比例

认证标志的颜色:
1.国家认证认可监督管理委员会统一印制的标准规格认证标志(以下简称统一印制的标准规格认证标志)的颜色为白色底版、黑色图案;
2.如采用印刷、模压、模制、丝印、喷漆、蚀刻、雕刻、烙印、打戳等方式(以上各种方式在以下简称印刷、模压)在产品或产品铭牌上加施认证标志,其底版和图案颜色可根据产品外观或铭牌总体设计情况合理选用。

认证标志的使用:
1.统一印制的标准规格认证标志,必须加施在获得认证产品外体规定的位置上;
2.印刷、模压认证标志的,该认证标志应当被印刷、模压在铭牌或产品外体的明显位置上;
3.在相关获得认证产品的本体上不能加施认证标志的,其认证标志必须加施在产品的最小包装上及随附文件中;
4.获得认证的特殊产品不能按以上各款规定加施认证标志的,必须在产品本体上印刷或者模压“中国强制认证”标志的特殊式样。
5. 获得认证的产品可以在产品外包装上加施认证标志

认证标志的其他相关要求:
1. 对于自行模压/印刷CCC标志需经批准后方可使用,批准有效期为一年,有效期后如未进行年审申请,不得继续使用CCC标志
2. 工厂需要建立认证标志的使用和管理制度,对认证标志的使用情况如实记录和存档;
3. 除安全玻璃,轮胎,汽车零部件,摩托车零部件,电线电缆等5类产品外,其他企业在申请自行模压/印刷时无需加注ccc认证工厂代码信息。

产品标示标注要求:
1.产品标识可以用文字、符合、数字、图案以及其他说明物等表示
2.除产品使用说明外,产品标识应当标注在产品或者产品的销售包装上。
  产品或者产品销售包装的最大表面的面积小于10平方厘米的,在产品或者产品销售包装上可以仅标注产品名称、生产者名称;限期使用的产品,在产品或者产品的包装上还应当标注生产日期和安全使用期或者失效日期
3.产品标识所用文字应当为规范中文
  以同时使用汉语拼音或者外文,汉语拼音和外文应当小于相应中文。
  产品标识使用的汉字、数字和字母,其字体高度不得小于1.8毫米
4. 产品标识应当清晰、牢固,易于识别
5. 产品标识应当有产品名称。产品名称应当表明产品的真实属性。
6.产品标识应当有生产者的名称和地址。生产者的名称和地址应当是依法登记注册的,能承担产品质量责任的生产者名称和地址
7.进口产品可以不标原生产者的名称、地址,但应当标明该产品的原产地(国家/地区,下同),以及代理商或者进口商或者销售商在中国依法登记注册的名称和地址
8.国内生产的合格产品应当附有产品质量检验合格证明
IRAM 阿根廷 mark

根据认证方式不同SICyM-IRAM 共有3种mark
1. IRAM mark  IRAM 标志
(when an IRAM standard is applied)


2. IRAM safety mark IRAM 安全标志
(when an IRAM or IEC standard exclusively related with safety is applied)


3. IRAM certification of conformity with manufacture  IRAM 生产符合标志
when an IEC or another foreign standard recoginzed or by IRAM or by the official dispositions is applied



铭牌上要用西班牙文 体现产品名称规格警语等参数。

我手上目前只有IRAM safety mark 的artwork 档案。如果需要可以下载
IRAM 矢量图
Construcción de la Marca IRAM.doc S矢量图
Contruccion de la Secretaria.doc

中国台湾 CS MARK要求
根据台湾商品检验标识使用办法最新的修正案里说明,台湾商品检验标识 已更名为中文“商品安全表章”,英文为Commodity Safety Mark简称 CS mark

台湾商品安全图章分2种,
一种是台湾标准检验局统一印制的(C字轨),


另一种是企业自行印制,
企业自行认证又根据认证种类和方式不同分为以下:
1.验证登陆产品(R字轨+指定代码) 适用电器、消防、电子、计算机信息产品、建筑装修、瓦斯器材、婴儿用品、电动手工具、玩具、壁挂式陶瓷脸盆及个人防护用具等。

 
2.符合性声明产品(D字轨+指定代码)适用计算机零组件、主机板及各项内插卡、数字相机、数字摄影机


3.形式认可产品(T字轨+指定代码)适用直流电子产品、计算机信息产品、瓦斯罐、抛弃式及简易型打火机


4.管理系统认可商品(Q字轨+指定代码)适用水泥及防火涂料
5.经核准自行印制者(M字轨+指定代码)适用玩具



自从2005年12月1起标准检验局开放部分产品验证登陆认证业务给第三方机构团法人台湾财电子检验中心后,财团法人电子检验中心也可以直接发证,其批准的CS标识后有ETC





根据台湾商品检验标识使用办法中规定,使用CS标志应遵循以下要求:

不予指定固定尺寸,但应以适当(方格子)比例大小标印于产品本体上。

由报验义务人自行印制之验证登录商品检验标识,应使用不易变质之材质制作,内容清晰可辨且不易磨灭,并以永久固定方式标示。

商品之其它标示不得与验证登录商品检验标识混淆,或使消费者不易辨别商品检验标识。

验证登录商品检验标识应标示于商品本体。但商品本体太小无法标示时,得依下列方式标示之:

1.   
具有包装者,于最小单位包装标示之。

2.   
无包装或其包装不适宜标示者,以系挂方式标示之。

3.   
包装标示或系挂均不适宜者,置放于包装内。

4.   
以其它经标准检验局核准之方式标示之。

前项标识,应标示于商品明显处,使消费者于购买或使用时能清楚识别


CSA标志

描述:(1)
图片:


描述:(2)
图片:


描述:(3)
图片:


CSA认证标志
      (1) 依照加拿大标准认证的标志
         

      (2) 依照加拿大和美国标准认证的产品标志
       
      (3) 依照美国标准认证的产品标志
         
 
  来源:csicn
文章出自: 世科网
本文网址: http://www.cgets.net/college/show-569.html

声明:

1、本网转载作品目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责。

2、凡来源注明“世科网”的所有作品,版权均属世科网所有,未经本网授权,不得转载使用。

3、如涉及作品内容、版权和其它问题,请在30个工作日内与本网联系,我们将在第一时间处理!

关键词: 铭牌 标签
分享到:
5.31K
 
[ 学院搜索 ]  [ ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
0条 [查看全部]  相关评论